753 DAIRY
ASHFORD RD.
HOUSTON,
TEXAS 77079
Diamond
Band Saw
|
|
The Inland DB-100 Mini
Band Saw is the first diamond band saw engineered and designed
to be a multiple use tool that cuts glass, stone, and a whole
lot more.
-
The DB-100 saws dozens of materials, wet
or dry. It includes a diamond blade for sawing glass, ceramic,
tile, stone, marble, porcelain, plastics, shells and more.
-
The optional WoodCut and MetalCut
blades saw wood, plastics, fiberglass, leather, thin brass and
copper, tin, printed circuit boards and more.
-
Replaceable BladeSert blade guides make
the most intricate cuts simple. The upper blade guide is adjustable
for varying material thickness.
-
The coolant system provides a continuous, regulated
flow of clean coolant to the diamond blade for wet sawing.
-
The five part spring-loaded tension system,
molded into the frame, insures proper wheel alignment, simple
blade setup and perfect tracking hour after hour. The spring-loaded
tension system acts like a shock absorber to protect and enhance
blade life.
-
The motor type is permanent magnet, high torque,
with built in speed control. These are powerful DC motors that
more consistently maintain torque as speed decreases.
-
Integrated internal drain channels and drain
tubes collect and funnel excess, dirty coolant away from the
blade and prevent it from re-circulating throughout the saw.
-
The work surface is made of machined aluminm
9" x 10". Drain channels funnel coolant into the internal
drain system for a clean, clear view while sawing.
-
The frame, cover, and water reservoir are molded
entirely from structural grade thermoplastic.
-
All frame and interior support walls are extra
thick for maximum strength and durability.
-
Its rigid and quiet. The molded plastic housing
absorbs and deadens sawing and motor sounds for quiet operation.
The plastic construction makes it extremely light weight and
easy to handle.
-
Two Year Full Confidence Warranty
Top of Page
-
Saw stone geodes, bottles, sea shells and marbles
in half
-
Saw all types and textures of stained glass
-
Make wood, stone or glass jigsaw puzzles
-
Cut multiple pieces simultaneously
-
Cut intricate pieces and shapes
-
Reduce scrap by getting the piece on the first
try
-
Cut complex patterns
-
Make scale stone or brick walls from the real
material
-
Saw tile for authentic scale flooring
-
Saw ceramic and flooring stone for home installation
-
Construction: Injection molded, structural
grade thermoplastic.
-
Motor: Permanent magnet, speed controlled, up
to 2800 Rpm.
-
Torque: 48 oz.-in.
-
Work surface: 9" x 10"
-
Size:18" high x 10" deep x 12"
wide.
-
Weight: 9.0 pounds
-
Additional Blades:
-
37.7" (96cm) Stainless Steel; Standard
Grit.
-
WoodCut Blade 1/8" wide (optional)
-
MetalCut Blade 1/8" wide (optional)
-
Throat Depth: 4.75" (12 cm)
-
Cutting Depth: Maximum material thickness: 3"
(7.6cm), up to 1" solid slab glass, up to 3" diameter
bottle.
-
Minimum Radius: 3/16" (.5 cm)*
-
Maximum Radius: 4.75" (12 cm)
-
Cutting Speed: Dependent on material type and
thickness. Up to 12"/minute (30.5 cm/minute)
-
Available in 115V and 230/240V
* Note that tighter radii can be cut but may
cause increase wear on the back edge of DiamondCut CopperAlloy
blades resulting in increase wear and premature breakage.
Top of Page
|
|
|
|